Lightronics Light Control Solutions
  Follow us on Twitter Like us on Facebook! Watch us on YouTube!

Dealer Login Dealer Login
SR516 - Plug & Play

Plug & Play

Installing the SR516D into your existing lighting control system is quick and easy.

  1. Unpack the SR516 from the box.
  2. Connect the power supply to the SR516D and an AC outlet.
  3. Remove the DMX cable from the OUTPUT of your console and insert it into the DMX OUT on the SR516D.
  4. Take the new DMX cable and connect it to the DMX OUT on your lighting console and the DMX IN on the SR516. 
  5. YOU’RE DONE and ready to program and use the SR516D.
Adding Lightronics Remote Button and Infrared Remotes to the SR516D.
    1. There is a DB9 connector on the rear of the SR516D.
    2. West Penn D4852 (or equal) cable provides the data and power connections between the SR516D and our Remote Button and Infrared Remote stations.
    3. Pin Connections to the DB9 are shown on Page 3 of the SR516 Manual.

Lightronics Affiliations

©2017 Lightronics All Rights Reserved
PLASA Member IES Member LCA Member